16
SE-DV54-1
EN
aDVancED mEnu controlS
SmartFlex Menu List
The SmartFlex menu is available in all modes and is a sub-menu that allows you to control
various functions of your SleepCube. It is accessed by pressing the down button while in this
Advanced Menu.
Display Example Description
SmartFlex
3
This setting controls the amount of pressure relief.
OFF = SmartFlex feature is OFF
1 = least amount of pressure relief
3 = most amount of pressure relief
SmartFlex Mode
Full Time
This setting controls the SmartFlex operating mode.
Full Time means SmartFlex feature is always active
Delay Only means SmartFlex feature is active only during the
pressure delay cycle.
SmartFlex IRnd
3
This setting controls the Inhale pressure waveform.
SmartFlex ERnd
3
This setting controls the Exhale pressure waveform.
Exit Menu
Press
Pressing the up key exits the SmartFlex menu
- If the unlocked symbol is shown, you are able to adjust this setting. If the locked symbol
is shown, this setting can only be adjusted by your provider.