21 Introduction
devolo Magic 2 WiFi
2-1
Before the networking procedure, write
down the Wi-Fi key of the devolo Magic
2WiFi
2-1
. You can find the device's unique
key on the label on the rear side of the
housing.
In order to connect the devolo Magic
2WiFi
2-1
with your laptop, tablet or smart-
phone later via Wi-Fi, enter the noted Wi-
Fi key as the network security key.
b In order to switch Wi-Fi off, press and hold the
Wi-Fi button longer than 3 seconds.
b In order to switch Wi-Fi back on, briefly tap
the Wi-Fi button.
Connecting Wi-Fi devices via WPS
b If the device is still on factory defaults, tap the
Wi-Fi button in order to activate WPS.
b If the Wi-Fi connection was switched off and
you would like to activate WPS, press the Wi-
Fi button twice; once to switch Wi-Fi on, and
again to activate WPS.
b If the Wi-Fi connection is switched on and you
want to copy these settings to another
devolo Magic adapter, continue reading with
the Chapter 4.7.5 Config Sync.
WPS is one of the encryption standards de-
veloped by the WiFi Alliance. The objective
of WPS is to make it easier to add devices to
an existing network. For more detailed in-
formation, refer to Chapter 4.4.7 Wi-Fi Pro-
tected Setup (WPS).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
