Devolo Magic 2 WiFi 2-1 - Firmware

49 Network configuration
devolo Magic 2 WiFi
2-1
System  Configuration  Save Configuration
to File area. The system starts downloading the
current device configuration.
Restoring the device configuration
An existing configuration file can be sent to the
devolo Magic 2 WiFi
2-1
in the System  Configu-
ration area and enabled there. Select a suitable file
via the Select file ... button and start the operation
by clicking the Restore button.
Factory Settings
The devolo Magic 2 WiFi
2-1
is reset to the original
factory defaults in the System  Configuration
area with the Factory Reset option.
Doing so causes you to lose your personal
WiFi and PLC settings. The last-assigned
passwords for the devolo Magic 2 WiFi
2-1
are also reset.
For backup purposes, all active configuration set-
tings can be transmitted to your computer, stored
there as a file and reloaded into the
devolo Magic 2 WiFi
2-1
. This function can be use-
ful for creating a variety of configurations that will
let you quickly and easily set up the device for use
in different network environments.
Reboot device
In order to reboot the devolo Magic 2 WiFi
2-1
,
select the Reboot button in the System  Confi-
guration area.
4.7.4Firmware
The firmware of the devolo Magic 2 WiFi
2-1
inclu-
des the software for operating the device. If neces-
sary, devolo offers new versions on the Internet as
a file download, for example to modify existing
functions.
Current firmware
The currently installed firmware of the
devolo Magic 2 WiFi
2-1
is displayed here.
Searching for and updating firmware
automatically
The adapter
can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
The devolo Magic 2 WiFi
2-1
lets you know
when a new firmware version becomes
available. The option is enabled by default.