47 Network configuration
devolo Magic 2 WiFi
2-1
4.7 System
In the System area, you can configure the settings
for security and other devolo Magic adapter device
functions.
4.7.1Status
Here you can view the most important information
on the devolo Magic adapter, including the current
date and time, time zone, MAC address of the
adapter, status of the WiFi and Powerline LEDs and
the two operating buttons.
4.7.2Management
System information lets you enter user-defined
names in the Device name (hostname) and
Device location fields. Both pieces of information
are particularly helpful if multiple devolo Magic
adapters are to be used and identified in the
network.
Under Change access password, a login password
can be set for accessing the web interface.
By default, the built-in web interface of the
devolo Magic 2 WiFi
2-1
is not protected by a
password. We recommend assigning a password
when the installation of the devolo Magic 2 WiFi
2-
1
is complete to protect it against tampering by
third parties.
To do so, enter the desired new password
twice. Now the web interface is protected
against unauthorised access with your cu-
stom password!
In Power Management, you can enable Power-
save mode and Standby mode on the
devolo Magic 2 WiFi
2-1
.
If Powersave mode has been enabled, the
devolo Magic 2 WiFi
2-1
switches to PowerSave
To Next Page
Loading...
Need help?
General
Weight and Dimensions
