DGSHAPE DWX-53DC - Page 18

16
Insta
llatio
n
Install the
aircraft
Important
0.6 Attach and tighten the N•m red sleeve to the torque screwdriver.
Important
The torque screwdriver uses a handle and bit. Do not use sleeves.
NOTE
Be sure to remove fixture B and screws. The removed fixture B and screws are required for transfer.
Keep the warranty in a safe place.
3. Use a Torque Driver to tighten the four mounting screws of Fixture A.
4. Open the adapter area cover.
5. Remove the screws with a torque screwdriver and remove fixture B.