DGSHAPE DWX-53DC - Page 29

Install the
aircraft
27
Insta
llatio
n
Warning
Insert the air hose all the way in. Pull lightly to confirm that it is not pulled out.
If the plug is loose, it may come off.
NOTE
When removing the air hose from the regulator, pull out the air hose slowly while pushing in the
ring of the regulator.
5. Insert the air hose into the regulator while pushing in the regulator ring.
Attach the air hose () supplied with your compressor to the left side of the regulator. Attach the other end
of the air hose () attached to the machine to the right side of the regulator.
6. Supply compressed air and check for air leaks from connections, etc.
1
2