DGSHAPE DWX-53DC - Page 38

Connect to a computer
36
Insta
llatio
n
Important
Do not use USB cable. Do not bend it.
If it is folded, the cable may be broken. If you connect USB cable to the bottom of the tablet, placing the
tablet on top of the tablet holder will bend the cable. Prepare a commercially available L-shaped adapter and
connect it to the supplied USB cable.
8. Connect the cable to the tablet and place it on the tablet holder.
9. Align the tablet holder with the width of the tablet and tighten the screws to secure it.
10. Press in on the tablet base and tighten the lower retaining screw.