DGSHAPE DWX-53DC - Page 37

Connect to a computer
35
Insta
llatio
n
NOTE
It is recommended to wrap tape around the ends of the two cables and bundle them together for
smooth cable passage.
5. Fit the tablet holder on the tablet base.
Tighten the screws after adjusting the tablet holder.
6. Pass the cable connecting to the tablet terminal through the cable entry on the rear of the aircraft.
Pass the cable through the insertion slot so that the terminal to be connected to the tablet terminal is
on the tablet base side.
7. Pull out the inserted cable from the inside of the tablet base.