Diamond DA 42 - 3.4 G1000 Failures

Emergency
Procedures
DA 42 AFM
Page 3 - 16 Rev. 8 15-Dec-2017 Doc. No. 7.01.05-E
3.4 G1000 FAILURES
3.4.1 NAVIGATION INFORMATION FAILURE
If Garmin G1000 GPS navigation information is not available or invalid, utilize remaining
operational navigation equipment as required.
3.4.2 PFD OR MFD DISPLAY FAILURE
1. DISPLAY BACKUP button on audio panel . . PUSH
Automatic Entry of Display Reversionary Mode
- If the PFD and MFD have automatically entered reversionary mode, use the following
procedure.
(a) DISPLAY BACKUP Button on Audio Panel . . PUSH (Button will be OUT)
NOTE
After automatic entry of reversionary mode, the pilot must
press the DISPLAY BACKUP button on the audio panel. After
the DISPLAY BACKUP button has been pushed, the system
will remain in reversionary mode even if the problem causing
the automatic entry of reversionary mode is resolved. A
maximum of one attempt to return to normal mode is
approved using the following procedure.
CONTINUED