Normal Operating
Procedures
DA 42 AFM
Page 4A - 12 Rev. 8 15-Dec-2017 Doc. No. 7.01.05-E
II. Walk-Around Check, Visual Inspection
CAUTION
A visual inspection means: examination for damage, cracks,
delamination, excessive play, load transmission, correct
attachment and general condition. In addition control surfaces
should be checked for freedom of movement.
CAUTION
In low ambient temperatures the airplane must be completely
cleared of ice, snow and similar accumulations. For approved
de-icing fluids refer to Section 8.7 - GROUND DE-ICING.
CAUTION
Prior to flight, remove such items as control surfaces gust
lock, Pitot cover, tow bar, etc.
CONTINUED
To Next Page
Loading...
