26
3. Continuously press or until the desired month is selected and DAYS is
displayed on the right side of the screen. The number of the month is on the left
(1 = January, 12 = December).
4. Press until the desired day of the week flashes.
5. Press
to remove the underline under the day of the week.
NOTE: During the selected month, watering will not occur on the days of the week
without the underline.
6. Press
to confirm your settings.
9.9.2 TO TURN OFF AN ENTIRE MONTH:
1. Press
and M will begin flashing.
2. Press until reaching the desired month and
MO is displayed on the right side of the screen.
On will be flashing.
3. Press
and OFF will appear. The selected
month is now turned off and no watering will
occur for the entire month.
4. Press
to confirm your settings.
The controller is now fully programmed.
Here is an example of the home screen
showing all the icons of the programs that
are currently set and active, which are the
SimpleSmart
™
, Monthly Budget, Rain Delay,
and Events Off settings. If OFF appears on this
screen, programmed watering will not occur
until
is pressed (the display will change to
the current time).
NOTE: Valves and programs with set schedules appear on the main screen. If the
valve or program is underlined, it means it is scheduled to run today.
To Next Page
Loading...
Need help?
General
