DIG 720A Series User Manual

9.3.3 OPTION 3 – WATERING ONCE EVERY X DAYS (CYCLICAL WATERING):
1. Press or until you see in the bottom left corner of the display.
2. Press to modify this setting.
3. Press or until 1 DAY appears flashing
on the display.
4. Press or to set the frequency (from
1 to 30 days).
5. Press to confirm your settings.
NOTE: To get from one option to any of the other options, press to
modify and then simply press or until the option desired appears
on the display, then follow the above steps for whichever option you would
like to set.
Press to continue on to setting start times for the chosen program.
9.4 SETTING START TIMES:
The 720A, 740A and 760A controllers can have up to five separate irrigation start
times per day per program.
9.4.1 TO SET A START TIME:
1. Press or until you see in the bottom left corner of the display.
2. Press to modify this setting.
NOTE: By default, start time 1 on program A is set to 6:00 AM and programs B
through D are set to OFF.
3. Press or to modify the hour.
4. Press and then or to modify the
minutes.
5. Press to confirm your changes.
16

DIG 720A Series Specifications

General

Brand	DIG
Model	720A Series
Category	Controller
Language	English