To Next Page

To Previous Page

The controller is now fully programmed.

Press the button to review the program or to return to the home screen.

Here is an example of the home screen showing all the icons of the programs that

are currently set and active, which is the SimpleSmart

™

(SET ET), monthly budget,

rain delay and events off programs.

14. manual WaTerInG

The manual mode allows the user to test the system and water for a specified

run time. The controller will automatically close the valve at the end of the defined

irrigation period. The originally programmed irrigation schedule continues to function

at the times assigned. The sensor condition is disregarded in this mode.

To start a manual run,

1. Press the

button, and the icon and icon appears. ON appears

momentarily and then the last watering duration is displayed with

. The

controller will open the valve and in 10 seconds a count down of the remaining

irrigation duration appears, showing when the controller will close the valve.

Questions and Answers:

Need help?

Do you have a question about the DIG LEIT-1 and is the answer not in the manual?

DIG LEIT-1 Specifications

General