Digi Connect ME Hardware Reference Manual

About the development board Basic description
Digi Connect ME, Wi-ME, ME 9210, Wi-ME 9210 Hardware Reference Manual
19
Basic description
The development board contains connectors, switches, and LEDs for use while integrating the
embedded module into your design. See the following figure for the location of the connectors,
switches, and LEDs. Additionally, the board provides test points (not shown on the figure). For more
information about test points, see Test points.

Digi Connect ME Specifications

General

Power Supply	3.3 VDC
Ethernet Ports	1
Serial Ports	1
Network Interface	10/100Base-T Ethernet
Serial Interface	RS-232/485
Operating Temperature	-40°C to 85°C
Product Type	Embedded Device Server
Protocols	TCP/IP, UDP, HTTP, FTP, SMTP, DHCP, DNS, SNMP, Telnet