Digi Connect ME Hardware Reference Manual

Regulatory information Europe
Digi Connect ME, Wi-ME, ME 9210, Wi-ME 9210 Hardware Reference Manual
68
account of the nature of the apparatus.
n The CE marking must be affixed visibly, legibly, and indelibly.
Declaration of Conformity (DoC)
Digi has issued Declarations of Conformity for the Rapidport USB to 4-Port Modem Module concerning
emissions, EMC, and safety. For more information, see www.digi.com/resources/certifications.
Important note
Digi customers assume full responsibility for learning and meeting the required guidelines for each
country in their distribution market. Refer to the radio regulatory agency in the desired countries of
operation for more information.
Maximum power and frequency specifications
Note The following maximum power and frequency specifications are for the Connect Wi-ME and
Connect Wi-ME 9210 only.
Connect Wi-ME
Maximum
power Frequencies
100 mW 13 overlapping channels each 22 MHz wide and spaced at 5 MHz. Total frequency
range is 2.3995 GHz to 2.4845 GHz.
Connect Wi-ME 9210
Maximum
power Frequencies
88 mW
13 overlapping channels each 22 MHz wide and spaced at 5 MHz. Total frequency
range is 2.3995 GHz to 2.4845 GHz.
28 mW 165 overlapping channels each 22 or 40 MHz wide and spaced at 5 MHz. Centered at
5180 to 5825 MHz.
International EMC Standards
Digi Connect ME Digi Connect Wi-ME
Storage temperature
-40°F to 257°F
(-40°C to 125°C)
Humidity 5% to 90%
Altitude 12000 feet
(3657.60 meters)
The Digi Connect ME and Digi Connect Wi-ME embedded modules meet the following standards:

Digi Connect ME Specifications

General

Brand	Digi
Model	Connect ME
Category	Network Hardware
Language	English