Digi Connect ME Hardware Reference Manual

Module specifications Data rates (bps)
Digi Connect ME, Wi-ME, ME 9210, Wi-ME 9210 Hardware Reference Manual
41
Data rates (bps)
50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 14400,19200, 28800, 38400, 57600,
115200, 230400, 460800 (Digi Connect ME 9210 only), 921600 (Digi Connect ME 9210 only)
Flow control options
RTS/CTS, XON/XOFF, None
DC characteristics
The following tables provide DC characteristics for operating conditions, inputs, and outputs.
Operating conditions
Symbol Description Min Typ Max Unit
V
CC
Supply Voltage 3.14 3.3 3.45 V
n/a Power Supply Ripple 40 mVpp
I
CC
Supply Current — — Digi
Connect
ME
270 mA
Digi Connect ME 9210 450
Digi
Connect
Wi-ME
650
I
IL
Input Current as “0”
(57K pull-up resistor)
— —
57
µA
9210
(16K pull up resistor)
-10 — 200
µA
I
IH
Input Current “1”
(57K pull-up resistor)
-10 — 10
µA
9210
(16K pull up resistor)
-10
—
10
µA
I
OZ
HighZ Leakage Current -10 — 10
µA
I
OD
Output Drive Strength — — 2 mA
C
IO
Pin Capacitance (V
O
=0) — — 4 pF
CAUTION! The module’s +3.3V (pin 15 for Digi Connect ME 9210 Family and pin 9 for Digi
Connect Wi-ME 9210 Family) has the equivalent of a 500uF capacitor connected between
it and GND. At power on, this equivalent capacitance will cause an input inrush current
that is dependent on the voltage rise time of the user supplied +3.3V power source. This
user supplied +3.3V power source must be able to supply the needed inrush current

Digi Connect ME Specifications

General

Brand	Digi
Model	Connect ME
Category	Network Hardware
Language	English