EasyManuals Logo
Home>Digi>Control Unit>ConnectCore

Digi ConnectCore User Manual

Digi ConnectCore
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
ConnectCore for i.MX51
©2011DigiInternational,Inc. 17
70 HSGPIO27 DISP2_DATA5 i.MX51: DISP2_DATA5 LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
71 GPIO27 DISP2_DATA8/
MII_TXD3/
USBH3_DATA0
i.MX51: DISP2_DATA8
ETH_PHY: TDX3
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
72 GPIO27 DISP2_DATA7/
MII_TXD2/UBH3_NXT
i.MX51: DISP2_DATA7
ETH_PHY: TDX2
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
73 GPIO27 DISP2_DATA10/
MII_COL/
USBH3_DATA2
i.MX51: DISP2_DATA10
ETH_PHY: COL
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
74 GPIO27 DISP2_DATA9/
MII_TXEN/
USBH3_DATA1
i.MX51: DISP2_DATA9
ETH_PHY: TXEN
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
75 GPIO27 DISP2_DAT12/
MII_RX_DV/
USBH3_DATA4
i.MX51: DISP2_DATA12
ETH_PHY: RXDV
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
76 GPIO27 DISP2_DAT11/
MII_RX_CLK/
USBH3_DATA3
i.MX51: DISP2_DATA11
ETH_PHY: RXCLK
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
77 GPIO27 DISP2_DATA14/
MII_RXD0/
USBH3_DATA6
i.MX51: DISP2_DATA14
ETH_PHY: RXD0
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
78 GPIO27 DISP2_DAT13/
MII_TX_CLK/
USBH3_DATA5
i.MX51: DISP2_DATA13
ETH_PHY: TXCLK
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
79 GPIO27 DI2_PIN2/MII_MDC i.MX51: DI2_PIN2
ETH_PHY: MDC
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
80 GPIO27 DISP2_DAT15/
MII_TXD0/
USBH3_DATA7
i.MX51: DISP2_DATA15
ETH_PHY: TXD0
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
81 GPIO27 DI2_PIN4/MII_CRS i.MX51: DI2_PIN4
ETH_PHY: CRS
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
82 - GND - -
83 RGB IOR i.MX51: IOR Not used
84 GPIO27 DI2_DISP_CLK/
MII_RXD1
i.MX51: DI2_DISP_CLK
ETH_PHY: RXD1
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
85 RGB IOR_BACK i.MX51: IOR_BACK Not used
86 GPIO27 DI2_PIN3/MII_MDIO i.MX51: DI2_PIN3
ETH_PHY: MDIO
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
87 RGB IOB i.MX51: IOB Not useD
88 IOG IOG i.MX51: IOG Not used
89 RGB IOB_BACK i.MX51: IOB_BACK Not used
Pin I/O Type Signal name Use on module Use on development board Comments
Downloaded from Elcodis.com electronic components distributor

Table of Contents

Other manuals for Digi ConnectCore

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digi ConnectCore and is the answer not in the manual?

Digi ConnectCore Specifications

General IconGeneral
BrandDigi
ModelConnectCore
CategoryControl Unit
LanguageEnglish

Related product manuals