EasyManua.ls Logo

DigiDesign C 24 - Page 102

DigiDesign C 24
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C|24 Guide94
To zoom out so that all regions are visible in the
Edit window:
Double-press the Zoom switch.
Using Zoom Presets
To store a Zoom Preset:
1 Using either the Horizontal Zoom buttons or
the Zoomer tool, set the zoom level that you
want to store.
2 Hold the Command/Ctrl Modifier switch and
press a Zoom Preset switch.
To recall a Zoom Preset:
Press the corresponding Zoom preset switch
(1-5).
Paging and Scrolling in the Edit
Window
To page horizontally in the Edit window:
1 Press the Navigate switch.
2 Hold the Command/Ctrl Modifier switch and
press the Previous (Left) or Next (Right) Arrow
switch.
To page vertically in the Edit window:
1 Press the Navigate switch.
2 Hold the Command/Ctrl Modifier switch and
press the Up or Down Arrow switch.
To horizontally scroll the contents of the Edit
window or Mix window:
1 Focus the window you want to scroll by click-
ing in it or by pressing the corresponding win-
dow key.
2 Hold the Opt/Alt (all) Modifier switch while
turning the Scrub/Shuttle Wheel.
To vertically scroll the contents of the Edit window
or Mix window:
1 Focus the window you want to scroll by click-
ing in it or by pressing the corresponding win-
dow key.
2 Hold the Shift (add) Modifier switch while
turning the Scrub/Shuttle Wheel.
Selecting Audio
To move the cursor or Edit selection up or down
one track:
1 Press the Navigate switch.
2 Press the Up or Down Arrow key.
To extend an Edit selection up or down one track:
1 Press the Navigate switch.
2 Hold Shift and press the Up or Down Arrow
key.
To create selections with the Scrub/Shuttle
wheel:
1 Locate the cursor in a track.
2 Press the Scrub switch or the Shuttle switch.
3 Do one of the following:
Hold the Mark In switch and turn the
Scrub/Shuttle wheel counter-clockwise to
create or extend the selection to the left.
– or –
Hold the Mark Out switch and turn the
Scrub/Shuttle wheel clockwise to create or
extend the selection to the right.
To scrub while adding to the front of a selection:
Hold the Ctrl/Win+Shift (add) Modifier
switches while scrubbing the front of the selec-
tion.

Table of Contents

Related product manuals