C|24 Guide50
Pre-Roll Switch Plays audio starting at the pre-
roll point up to the beginning of the selection.
Mark In Switch Plays audio starting at the selec-
tion start through the length of the post-roll
amount.
Mark Out Switch Plays audio back-timed from
the selection end by the pre-roll amount.
Post-Roll Switch Plays audio starting at the end
of a selection through the post-roll amount.
Return to Zero/Go To End Switch
The Return to Zero/Go To End switch locates the
cursor to the beginning or end of the session.
Transport Equals Switch
The Transport Equals switch cycles the Trans-
port Master through the available options,
which can include Pro Tools, Machine, MMC,
or Remote. The Transport Equals switch lights
when the Transport Master is set to Machine,
MMC, or Remote.
Online Switch
The Online switch toggles the Pro Tools trans-
port online status when triggering playback
from an external source. The Online switch
flashes when the transport is waiting for sync;,
and lights to indicate that the transport is on-
line.
Pre-Roll and Post-Roll Switches
The Pre-Roll and Post-Roll switches toggle the
enable status of pre-roll and post-roll in the
Pro Tools transport. The Pre-Roll and Post-Roll
switches light to indicate they are enabled.
In Audition mode, the Pre-Roll and Post-Roll
switches activate playback of various parts of an
edit selection. See “Audition Switch” on
page 49.
Mark In and Mark Out Switches
In Audition mode, the Mark In and Mark Out
switches activate playback of various parts of an
edit selection.
Dynamic Transport Switch
The Dynamic Transport switch toggles Dynamic
Transport mode on and off.
Loop Playback Switch
The Loop Playback switch toggles Loop Playback
mode on and off. The Loop Playback state is mir-
rored in the Play button in the Pro Tools Trans-
port window. When Loop Playback mode is ac-
tive, this switch lights.
Loop Record Switch
The Loop Record switch toggles Loop Record
mode on and off. The Loop Record state is mir-
rored in the Record button in the Pro Tools
Transport window. When Loop Record mode is
active, this switch lights.
QuickPunch Switch
The QuickPunch switch toggles QuickPunch
record mode on and off. When QuickPunch
mode is active, this switch lights. The Quick-
Punch state is mirrored in the Record button in
the Pro Tools Transport window.
To Next Page
Loading...
