Digigram PYKO-out - 8 Appendix A: Firmware

PYKO-out: Professional IP audio endpoint

8. APPENDIX A: FIRMWARE
Digigram provides three PYKO-out compatible firmware applications (compound.bin).
Firmware description
The Play-out firmware is used for AudioManager based applications, and does not support the USB
memory stick.
The ‘Play-out extended’ firmware is used for applications where a USB memory stick is necessary
(typically broadcast applications, application for remote control of playlist on USB)..
Firmware
Play-out
Play-out extended
Webcast Receiver
Control through Audio
Manager
•
TCP protocol
•
Audio Format
Play-out
Play-out extended
Webcast Receiver
MP3
16 to 48 kHz
dec ∗
1
dec
dec
PCM (16bit)
8 to 32 kHz
dec
dec
PCM (16bit)
44,1 to 48 kHz
dec
dec
44.1kHz on priority port
G711
dec
dec
Shoutcast/icecast
•
AAC+
USB/shoutcast
EtherSound
Stereo dec (firmware indep.)
USB
• level 3 for backup,
level 2 for prerecorded
announce
•
FTP on USB
•
GPIO local event
•
GPIO tunneling
•
•
FD Serial Link
management (RS232)
•
•
Multicast
Rx
Rx
Rx
IGMP
•
•
•
SNMP
•
•
•
Niveaux de priorité
3
3
3
There are 3 levels of priority for the applications. These levels are configurable through the embedded
web pages.
If you control the ‘Play-out’ application through Audio Manager, it will use by default priority level # 2.
1
28