EasyManuals Logo

Digisol DG-GS1528HP/C User Manual

Digisol DG-GS1528HP/C
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
DG-GS1528HP/C User Manual
5
3 Getting Started
This chapter introduces the management interface of Web Managed PoE switch.
Management Option
The Web Managed PoE switch can be managed through any port on the device by using the Web-based
management.
Each switch must be assigned its own IP address, which is used for communication with Web-Based Management or
a SNMP network manager. The PC should have an IP address in the same range as the switch.
Please refer to the following installation instructions for the Web-based Management.
Using Web-based Management
After a successful physical installation, you can configure the Switch, monitor the network status, and display statistics
using a web browser.
Supported Web Browsers
The embedded Web-based Management currently supports the following web browsers:
Internet Explorer 6 or higher version
Netscape 8 or higher version
Mozilla
Firefox 1.5/2.0 or higher version
Connecting to the Switch
You will need the following equipment to begin the web configuration of your device:
1. A PC with a RJ-45 Ethernet connection
2. A standard Ethernet cable
Connect the Ethernet cable to any of the ports on the front panel of the switch and to the Ethernet port on the PC.
Connected Ethernet cable

Other manuals for Digisol DG-GS1528HP/C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digisol DG-GS1528HP/C and is the answer not in the manual?

Digisol DG-GS1528HP/C Specifications

General IconGeneral
BrandDigisol
ModelDG-GS1528HP/C
CategorySwitch
LanguageEnglish

Related product manuals