Rev A September 2008 page 5.17
Digital Projection TITAN User Manual 5. Userware
Notes
Read the notes on MCGD,
TCGD and ColorMAX earlier
in this section before making
any MCGD settings.
1. New MCGD values will not
be downloaded to the projector
until the Download button is
pressed.
2. The values will not be used
until the ColorMAX User 1 or
ColorMAX User 2 is chosen in
the Colour or Global
Colourimetry menus.
3. If one of the User settings is
already in use, then it will be
necessary to re-apply it before
any change is seen.
MCGD files are named
filename.mcgd.
• To see the MCGD page, click on MCGD .
On first entering the MCGD screen, the MCGD values will show those currently
loaded into the projector.
MCGD values
• To enter MCGD values, click on each box in turn, and enter the measured x and
y values for each colour.
Download
• Click on Download to save the values on screen to the projector.
Save File
• Click on Save to save the values on screen to an MCGD file on the computer.
When promted, enter a filename or browse to an existing file that is to be
overwritten.
Open File
• To retrieve a set of saved MCGD values, click on Open .
When promted, enter a filename or browse to the file that is to be opened.
MCGD
values
MCGD page continued
To Next Page
Loading...
Need help?
General
