Rev A September 2008 page 5.25
Digital Projection TITAN User Manual 5. Userware
Notes
The Discover page is available
only on the Standalone version
of the Userware..
The Userware can be used to
control only one projector at a
time, and only one instance can
be running at one time.
The Discover page can be
used to switch control between
multiple projectors.
More than one computer can be
used to control more than one
projector on the same network.
Discover page
• To see the Discover page, click on Discover.
If the projector that launched the Userware is still connected, then its LAN IP
address will be listed in the panel and marked Online.
Projector Connected will be shown at the top left, together with the projector’s
Serial No and Model.
Disconnect
• Click on Disconnect to disconnect from the projector.
Projector Disconnected will be shown at the top left.
Reconnect
• Click on the LAN IP address to reconnect to the projector.
To Next Page
Loading...
Need help?
General
