Digital Projection Titan series User Manual

Rev A September 2008 page 5.7
Digital Projection TITAN User Manual 5. Userware
Show page
The Show page is the first to display when the browser connects to the projector.
• To return to the Show page at any time, click on Show.
On / Off
• Click On to switch the projector On.
• Click Off to switch the projector into Standby mode.
Shutter Open / Closed
• Click on Shutter O to open the shutter.
• Click on Shutter C to close the shutter.
Freeze / Un-Freeze
• Click on Freeze to freeze the display on the current frame.
• Click on Un-Freeze to un-freeze the display.
Picture sliders
• Use the sliders to adjust the Brightness, Contrast, Saturation, Hue and
Sharpness of the display.
• Click on the number above the slider to return to the default value.
Notes
Picture
sliders

Digital Projection Titan series Specifications

General

Brand	Digital Projection
Model	Titan series
Category	Projector
Language	English