The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confi dential.
Any disclosure, copying, distribution to third
party is strictly prohibited.
67
Ac ve Sync (Usb Connec on)
To avoid accidental or inten onal damage by default the ac ve sync is disabled, to enable it open control panel,
double click on pc connec on icon and check the “Allow connec on with desktop computer when device is a ached”
box and press ok (see picture for details). To save this confi gura on go to \hard disk\sysapps and lunch savereg.exe
and press “save windows registry”.
If you connect Ac ve sync your applica on won’t be able to connect RAS, to avoid this problem, a er having con-
nect to Ac ve Sync and Before launching the applica on you should run the delroute.bat in SysApps.
Notes: Before distribu on device to users it’s recommended to disable ac ve sync connec on in order to avoid the
users to access to the system.
To Next Page
Loading...
Need help?
General
