EC-Declaration of Conformity
Note: This Declaration of Conformity and the -mark affixed to the nameplate are valid for the vacuum pump within the Busch-scope of delivery.
When this vacuum pump is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating
company, too) must conduct the conformity assessment process acc. to the Directive Machinery 98/37/EC for the superordinate machine, issue the
Declaration of Conformity for it and affix the -mark.
We
Busch Produktions GmbH
Schauinslandstr. 1
79689 Maulburg
Germany
declare that vacuum pumps RA 0025 - 0040 F
in accordance with the European Directives
“Machinery” 98/37/EC,
“Electrical Equipment Designed for Use within Certain Voltage Limits” (so called “Low Voltage”) 73/23/EEC,
“Electromagnetic Compatibility” 89/336/EEC
have been designed and manufactured to the following specifications:
Standard Title of the Standard
Harmonised Standards
EN 12100-1
EN 12100-2
Safety of machinery - Basic concepts, general principles of design - Part 1 and 2
EN 294 Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs
EN 1012-1
EN 1012-2
Compressors and vacuum pumps - Safety requirements - Part 1 and 2
EN ISO 2151 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 61000-6-1
EN 61000-6-2
Electromagnetic compatibility (EMC) - Generic immunity standards
EN 61000-6-3
EN 61000-6-4
Electromagnetic compatibility (EMC) - Generic emission standards
Manufacturer
Dr.-Ing. Karl Busch
General director
RA 0025 - 0040 F EC-Declaration of Conformity
0870139077 / 051214 page 23
To Next Page
Loading...
