Special functions for maintenance
www.dilo-gmbh.com | 0600.bae
Special functions:
The following special functions can be carried out:
4. Purge compressor
5. Empty device (Pressure reduction)
6. Recovery of filter
7. Evacuation of filter
8. Pressure test compressor
9. Manual operation
10. Evacuation of air from the service cart
11. Filling of external cylinders from the internal storage tank
Each function has to be preselected by means of the knob switch on the device.
The preselected function is displayed in the first line on the operating panel.
Preselected function
Then the preselected function can be started by pressing the green “I" key on the double key.
The activated function can be stopped by the red "0" key on the double key.
The special functions stop as soon as the knob switch is turned to another position.
To Next Page
Loading...
