Maintenance and functional test
www.dilo-gmbh.com | 0900.bae
Maintenance
Only authorized personnel should carry out purification, lubrification and maintenance
works in accordance with maintenance instructions and regulations for the prevention
of accidents.
In case of non compliance this could result in injury or death and also considerable
damage to the equipment.
Carry out maintenance works only if the device is switched off.
Touch hot components (e. g. evaporator, pump parts) only after they have
cooled down!
Ensure that used oils and filter materials are disposed of in accordance with
local environment regulations.
When working with harmful materials (e. g. filter cartridge) the working
protection set should be used (DILO-working protection set 3-442-R...)
Exchange filters which contain or are saturated with decomposition products.
The operating hours of the individual components can be displayed on the operating panel (see chapter 2)
When reaching a maintenance interval the maintenance is to be carried out in accordance with the
maintenance schedule.
Danger
To Next Page
Loading...
