Product description
www.dilo-gmbh.com | 0200.bae
Manual operation
In manual operation the components and the valve can be switched separately.
In order to reach the manual operation the basic configuration must be set on the operating panel.
Press the “down arrow” key and turn the knob switch to the position 9.
In case the knob switch is not in position 9 the following page appears:
This page can be left by pressing the “down arrow” key or turn the knob switch to the position 9.
If the manual operation is selected correctly the following page appears:
Now the components indicated on the operating panel can be switched on and off or the valves can be
opened and closed by means of the corresponding function key.
In order to complete the manual operation press the “down arrow“ key and select another function with
the knob switch.
To Next Page
Loading...
