General safety notes
www.dilo-gmbh.com | 0100.bae
Work on electrical equipment
Only properly trained electricians should carry out repair works on the device electrical
equipment.
Regularly check the electrical equipment.
Re-tighten loose connections.
Replace damaged lines/cables immediately.
Always keep the control cabinet closed. Only authorized persons with key/tools should
work on the device.
Never clean control cabinets and other electrical equipment housings using a water
hose.
Work on SF
6
-gas filled equipment
Only specially trained personnel should carry out maintenance and repair works on pressure gas filled
equipment.
Prior to maintenance and repair works depressurize the pressure gas filled equipment of the device.
Replace hose lines for preventive purposes even if no damage is visible. (Follow recommendations of
manufacturer).
After having carried out maintenance and repair works and prior to putting back into service
check that loosened screw connections are properly seated.
ensure that the tank caps, sieves or filters that have been removed have been re-installed.
After having carried out the maintenance and repair works and before operation ensure that
all materials, tools and other equipment which were necessary for the maintenance or repair
works have been removed from the working area of the device.
liquids that may have come out have been removed (wiped away)
all safety devices for the unit are properly set and in working order.
To Next Page
Loading...
