Directed Electronics AM1 Installation Guide

© 2005 directed electronics, inc.
11
IIMMPPOORRTTAANNTT!!
Never interrupt any wire other than the starter wire.
HH11//22 WWHHIITTEE lliigghhtt ffllaasshh oouuttppuutt::
As shipped, this wire should be connected to the (+)
parking light wire. It will supply a (+) 10A output. If the light flash polarity fuse jumper
inside the unit is moved to the opposite position (see Internal Jumpers), this wire sup-
plies a (-) 10A output. This is suitable for driving (-)parking light wires.
LIGHT BULB
PARKING LIGHT
RELAY OR SWITCH
(+) 12V
WHITE H1/2
(-) LIGHT FLASH OUTPUT

Directed Electronics AM1 Specifications

General

Brand	Directed Electronics
Model	AM1
Category	Car Alarm
Language	English