To Next Page
M
Marie HoganSep 23, 2025
What does DEI feature error mean on Directed DS4+ Automobile Accessories?
- EElizabeth MartinezSep 23, 2025
A feature config file mismatch was detected.
What does DEI feature error mean on Directed DS4+ Automobile Accessories?
A feature config file mismatch was detected.
What does it mean when ISO 1 is not detected on Directed Remote Starter?
The Yellow/Black wire did not detect the expected signal. Check the connections.
What does it mean when ISO 2 is not detected on Directed Remote Starter?
The Orange/Black wire did not detect the expected signal. Check the connections.
What does it mean when MUX is not detected on Directed Remote Starter?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
Why Runsafe was not disabled on Directed Remote Starter?
No UNLOCK command was received before opening the door, or the 45 second timer expired in takeover mode.
What does PTS shutdown error mean on Directed Remote Starter?
The PTS output from the module was not activated due to safety protection.
What does DEI feature error mean on Directed Remote Starter?
A feature config file mismatch was detected.
What to do if the smart key is not detected by Directed Automobile Accessories?
The smart key was not detected, which prevents the system from shutting down the vehicle.
What to do if Directed DS4+ bypass data is not detected?
Check the bypass line connection. If you're using multiple wires, make sure they aren't inverted. Also, ensure the vehicle still operates correctly with the factory key.
Why Directed DS4+ waiting to begin the programming sequence?
Ensure the correct programming procedure is being followed.
Installation diagram and details for Type 1 with T-Harness.
Installation diagram and details for Type 2 with T-Harness.
Installation diagram and details for Type 3.
Installation diagram and details for Type 5 with T-Harness.
Installation diagram and details for Type 8.
LED indicators for module programming states and errors.
Troubleshooting analog feature configuration errors via LED.
Resets programming steps without affecting firmware.
Reverts firmware to default settings, requiring reconfiguration.
Programming Virtual Tach for starter motor control during remote start.
General| Brand | Directed |
|---|---|
| Model | DS4+ |
| Category | Automobile Accessories |
| Language | English |
