67
Using the Timers List
Special Considerations When Using Timers
• For Locked Programs—You must enter the receiver password before you can create
an automatic timer. You can create a manual timer for a locked program without
entering the password. However if you do this, when the timer starts, the receiver may
display only an error or password-entry menu screen.
• For Pay-Per-View Programs—You must order a Pay-Per-View program or event
when you create an event timer for it.
• For Blacked Out Programs—If you set a timer for a program or event that is blacked
out in your area, then when the timer occurs, the receiver may only display an error.
USING THE TIMERS LIST
USING THE DAILY SCHEDULE
Use the ARROWS to select a future program if you want to Skip or Restore a timer. You
can also choose to Protect it, or view the start early/end late settings.
• To change the start early/end late setting, select the event within the Timers List.
• If the program is included in a DishPASS timer, you cannot change the start early or
end late times on an individual occurrence; it must be changed within the DishPASS
timer, selected from the full event Timers List.
• Press PAGE UP to see the previous days' timers. Review these timers if you want to
see the result of these timers (for example, if a timer recorded successfully or why it
might have been skipped).
To Next Page
Loading...
