Dish Network ViP622 - Setting U P an Automatic Timer; Setting U P a Manual Timer

68
Setting Up an Automatic Timer
Chapter 9
SETTING UP AN AUTOMATIC TIMER
1 Find a program or event to record in the future using the Program Guide or Browse
Banner. The program can be a satellite delivered or over-the-air program (see page 116
for instructions on properly connecting an over-the-air antenna to your receiver).
2 Select a program or event in the future. The Create Timer screen is displayed.
3 Select one of the Timer Types (see page 64 for more details).
4 Select the Timer Frequency (see page 64 for more details).
5 Select any Options (see page 65 for more details), as applicable.
6 Select Set Priority if you would like to change the current priority of the event timer (see
page 64 for more information).
7 Select Create Timer to finish making and save the new event timer.
SETTING UP A MANUAL TIMER
1 Press the MENU button and select Daily Schedule. You can also press the DVR button
three times for quick access to the Schedule screen.
2 Select Timers.
3 Select Manual Timer.
4 Select one of the Timer Types (see page 64 for more details).
5 Select the Timer Frequency (see page 64 for more details).