Controls - 34 SK3000 Operator’s Manual
Display
3. Engine coolant
temperature gauge
Displays engine
coolant temperature.
4. Voltmeter Displays system
voltage.
5. Engine load gauge Displays engine load.
6. Hydraulic fluid
temperature indicator
Lights when hydraulic
fluid temperature is
high.
7. Engine start indicator Lights during engine
startup.
If indicator turns off while starting
engine, allow starter to cool 30
seconds.
See “Start” on page 52.
8. Parking brake indicator Lights when parking
brake is set.
9. Ride control/Self-level
indicator
Lights when ride
control is selected.
Lights when self-level
is selected.
See “Ride control/Self-level switch”
on page 50.
10. Engine warning/stop
indicator
Lights when engine
needs attention.
Lights when operator
needs to stop engine.
11. Operator presence
indicator
Lights when operator
is not on platform.
Lights when operator
is on platform.
12. Exhaust cleaning system
error indicator
Lights when an error is
detected in exhaust
cleaning system.
If indicator lights, contact your
Ditch Witch dealer.
13. High exhaust
temperature indicator
Lights when exhaust
temperature is high.
Will light during exhaust cleaning.
14. Exhaust cleaning
indicator
Lights when exhaust
cleaning is needed.
Item Description IMPORTANT