VP30 Operator’s Manual Operation Overview - 29
Drilling
Drilling
1. Start unit. See page 38.
2. Dig approach trench and target trench. See page 56.
3. Assemble drill string and position tractor. See page 55.
4. Begin drilling. See page 61.
5. Use drill string guide as needed. See page 62.
6. Add rod. See page 64.
7. Backream. See page 65.
8. Shut down tractor. See page 41.
9. Disassemble drill string. See page 69.
Leaving Jobsite
1. Restore the jobsite. See page 74.
2. Rinse machine and stow tools. See page 74.
3. Load machine onto trailer. See page 45.
To Next Page
Loading...