dixell ichill IC100C series User Manual

IC100C Series PRELIMINARY
1592015000 Manual IC100C Series 28/05/03 Page 15 di 38
A07 Anti freeze alarm Digital input active
anti freeze probe
Pbr < AR03 for
minimum AR05
seconds
Open collector / alarm relay ON
Buzzer ON
General alarm icon lighted
Alarm code on display
Automatic.
It turns to manual after Ar06
events in 1 hour.
Manual:
the event expires if Pbr >
(AR03+AR04), then proceed
with manual reset.
A07 Anti freeze alarm
motocondensing
unit
Digital input active
CF01=6,7 and
CF05=2
Open collector / alarm relay ON
Buzzer ON
General alarm icon lighted
Alarm code on display
Automatic.
It turns to manual Ar06 events
in 1 hour.
Manual:
the event expires, then proceed
with manual reset.
A08 Water flow alarm
(air/water
water/water;
Supply air fan
thermal protection
(air/air)
Digital input active
for AL06 duration.
Open collector / alarm relay ON
Buzzer ON
Flow alarm icon lighted
Alarm code on display
Automatic.
It turns to manual after Ar05
events in 1 hour.
Manual:
the event expires for AL07,
then proceed with manual
reset.
A09 Compressor 1
thermal protection
alarm
Digital input active Open collector / alarm relay ON
Buzzer ON
General alarm icon lighted
Alarm code on display
Manual:
the event expires, then proceed
with manual reset.
After AL09 events in 1 hour
and digital input not active, set
AL10=0 to resume.
A10 Compressor 2
thermal protection
alarm
Digital input active Open collector / alarm relay ON
Buzzer ON
General alarm icon lighted
Alarm code on display
Manual:
the event expires, then proceed
with manual reset. After AL09
events in 1 hour and digital
input not active, set AL10=0 to
resume.
A11 Condenser fan
thermal protection
alarm
Digital input active Open collector / alarm relay ON
Buzzer ON
General alarm icon lighted
Alarm code on display
Manual:
the event expires, then proceed
with manual reset.
A12 Defrost error alarm End defrost after
dF07 (Max defrost
length) with
dF02=2
Only alarm code on display Automatic:
with next proper defrost cycle.
Proceed with manual reset.
A13 Compressor 1
maintenance
warning
Running hour >
CO14
Open collector / alarm relay ON
Buzzer ON
Maintenance icon lighted
Alarm code on display
Manual:
Proceed with the hour reset
procedure 16.6
A14 Compressor 2
maintenance
warning
Running hour >
CO15
Open collector / alarm relay ON
Buzzer ON
Maintenance icon lighted
Alarm code on display
Manual:
Proceed with the hour reset
procedure 16.6

dixell ichill IC100C series Specifications

General

Brand	dixell
Model	ichill IC100C series
Category	Controller
Language	English