DJI Mavic 3 User Manual
35
©
2021 DJI All Rights Reserved.
RTH Button
Press and hold the RTH button until the remote controller beeps to start RTH. Press this button again to
cancel RTH and regain control of the aircraft. Refer to the Return to Home section for more information
about RTH.
Customizable Buttons
Including C1, C2, and the 5D button. Go to System Settings in DJI Fly and select Control to customize
the function of the button.
Combination Buttons
Back + Gimbal Dial: Adjust Brightness
Back + Camera Control Dial: Adjust Volume
Back + Record Button: Record Screen
Back + Shutter Button: Screenshot
Back + 5D Button: Up - Home, Down - Shortcut Settings, Left - Recent
Status LED and Battery Level LEDs Description
Status LED
Blinking Pattern Descriptions
Solid red Disconnected with aircraft
Blinks red The temperature of the remote controller is too high or the battery level of the
aircraft is low
Solid green Connected with aircraft
Blinks blue The remote controller is linking to an aircraft
Solid yellow Firmware update failed
Blinks yellow The battery level of the remote controller is low
Blinks cyan Control sticks not centered
Battery Level Indicators
Blinking Pattern Battery Level
75%~100%
50%~75%
25%~50%
0%~25%