DJI Mavic 3E/3T User Manual
23
©
2022 DJI All Rights Reserved.
Flight Restrictions
GEO (Geospatial Environment Online) System
DJI’s Geospatial Environment Online (GEO) system is a global information system that
provides real-time information on flight safety and restriction updates and prevents UAVs
from flying in restricted airspace. Under exceptional circumstances, restricted areas can
be unlocked to allow flight. Prior to that, the user must submit an unlocking request based
on the current restriction level in the intended flight area. The GEO system may not fully
comply with local laws and regulations. Users shall be responsible for their own flight
safety and must consult with the local authorities on the relevant legal and regulatory
requirements before requesting to unlock a flight in a restricted area.
GEO Zones
DJI’s GEO system designates safe flight locations, provides risk levels and safety notices for
individual flights and offers information on restricted airspace. All restricted flight areas are
referred to as GEO Zones, which are further divided into Restricted Zones, Authorization
Zones, Warning Zones, Enhanced Warning Zones, and Altitude Zones. Users can view such
information in real-time in DJI Pilot 2. GEO Zones are specific flight areas, including but not
limited to airports, large event venues, locations where public emergencies have occurred
(such as forest fires), nuclear power plants, prisons, government properties, and military
facilities.
By default, the GEO system limits takeoffs and flights in zones that may cause safety or
security concerns. A GEO Zone map that contains comprehensive information on GEO
Zones around the globe is available on the official DJI website: https://www.dji.com/flysafe/
geo-map.
Flight Restrictions in GEO Zones
The following section describes in detail the flight restrictions for the above mentioned GEO
Zones.
GEO Zone Flight Restriction Scenario
Restricted
Zones (Red)
UAVs are prohibited
from flying in
Restricted Zones. If
you have obtained
permission to fly in
a Restricted Zone,
please visit https://
www.dji.com/flysafe
or contact flysafe@
dji.com to unlock the
zone.
Takeoff: the aircraft motors cannot be started in
Restricted Zones.
In Flight: when the aircraft flies inside a
Restricted Zone, a 100-second countdown will
commence in DJI Pilot 2. When the countdown
is finished, the aircraft will land immediately in
semi-automatic descent mode and turn off its
motors after landing.
In Flight: when the aircraft approaches the
boundary of a Restricted Zone, the aircraft will
automatically decelerate and hover.
To Next Page
Loading...
Need help?
General
