EasyManuals Logo

dji MAVIC 3T User Manual

dji MAVIC 3T
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
DJI Mavic 3E/3T User Manual
56
©
2022 DJI All Rights Reserved.
Advanced Features
Calibrating the Compass
The compass may need to be calibrated after the remote controller is used in areas with
electromagnetic interference. A warning prompt will appear if the compass of the remote
controller requires calibration. Tap the warning prompt to start calibrating. In other cases,
follow the steps below to calibrate your remote controller.
1. Power on the remote controller and enter the homepage.
2. Select Settings, scroll down, and tap Compass.
3. Follow the on-screen instructions to calibrate the compass.
4. A prompt will be displayed when the calibration is successful.
HDMI Settings
The touchscreen can be shared with a display screen via an HDMI cable.
The resolution can be set in Settings, Display, and then HDMI.
Method 2: Using DJI Pilot 2
1. Power on the aircraft and the remote controller.
2. Run DJI Pilot 2 and tap Link Remote Controller to link. The status LED of the remote
controller blinks blue, and the remote controller beeps.
3. Press and hold the power button of the aircraft for more than four seconds. The aircraft
beeps twice after a short beep, and its battery level LEDs blink in sequence to indicate
it is ready to link. The remote controller will beep twice, and its status LED will turn solid
green to indicate linking is successful.
Make sure the remote controller is within 50 cm of the aircraft during linking.

Other manuals for dji MAVIC 3T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji MAVIC 3T and is the answer not in the manual?

dji MAVIC 3T Specifications

General IconGeneral
Built-in processor-
Internal memory64 GB
Memory card slot(s)Yes
Compatible memory cardsMicroSD (TransFlash)
AC adapter power100 W
AC adapter frequency50/60 Hz
AC adapter input voltage100/240 V
AC adapter output current2.5 A
Operating temperature (T-T)-10 - 40 °C
Moving control functionsBackward, Downward, Forward, Upward
Megapixel20 MP
Sensor typeCMOS
Video resolutions1920 x 1080, 3840 x 2160, 4096 x 2160 pixels
Optical sensor size1/2 \
Camera shutter speed8-1/8000 s
Video formats supportedAVC, H.264, H.265, HEVC, MPEG4
Maximum image resolution5280 x 3956 pixels
Field of view (FOV) angle85 °
Supported video streaming modes1080p
Battery voltage7.2 V
Battery capacity5000 mAh
TypeQuadcopter
Product colorGray
USB ports quantity1
Maximum speed6 m/s
Frequency band2.4 - 2.4835 GHz
Number of rotors4 rotors
Maximum tilt angle35 °
Hovering time (max)45 min
Maximum ascent speed1 m/s
Maximum weight capacity- kg
Maximum wind resistance12 m/s
Maximum operating distance32000 m
Maximum yaw angular velocity200 °/sec

Related product manuals