dji MAVIC 3T User Manual

DJI Mavic 3E/3T User Manual
16
©
2022 DJI All Rights Reserved.
d. Flying over moving surfaces or objects.
e. Flying in an area with frequent and drastic lighting changes.
f. Flying over extremely dark (< 10 lux) or bright (> 40,000 lux) surfaces.
g. Flying over surfaces that strongly reflect or absorb infrared waves (e.g., mirrors).
h. Flying over surfaces without clear patterns or texture.
i. Flying over surfaces with repeating identical patterns or textures (e.g., tiles with the
same design).
j. Flying over obstacles with small surface areas (e.g., tree branches).
• Keep the sensors clean at all times. DO NOT scratch or tamper with the sensors. DO
NOT use the aircraft in dusty or humid environments.
• DO NOT fly when it is rainy, smoggy, or the visibility is lower than 100 m.
• Check the following each time before takeoff:
a. Make sure there are no stickers or any other obstructions over the glass of the Vision
Systems and Infrared Sensing system.
b. Use soft cloth if there is any dirt, dust, or water on the glass of the Vision Systems
and Infrared Sensing system. DO NOT use any cleaning product that contains
alcohol.
c. Contact DJI Support if there is any damage to the glass of the Infrared Sensing and
Vision Systems.
• DO NOT obstruct the Infrared Sensing System.
Return to Home
Return to Home (RTH) brings the aircraft back to the last recorded Home Point when the
positioning system is functioning normally. There are three types of RTH: Smart RTH, Low
Battery RTH, and Failsafe RTH. The aircraft automatically flies back to the Home Point
and lands when Smart RTH is initiated, the aircraft enters Low Battery RTH, or the signal
between the remote controller and the aircraft is lost during flight.
GNSS
Description
Home
Point
1
0
The first location where the aircraft receives a strong to moderately
strong GNSS signal (indicated by a white icon) will be recorded
as the default Home Point. The Home Point can be updated
before takeoff as long as the aircraft receives another strong to
moderately strong GNSS signal. If the signal is weak, the Home
Point will not be updated. DJI Pilot 2 will give a voice prompt when
the Home Point is set.

dji MAVIC 3T Specifications

General

Built-in processor	-
Internal memory	64 GB
Memory card slot(s)	Yes
Compatible memory cards	MicroSD (TransFlash)
AC adapter power	100 W
AC adapter frequency	50/60 Hz
AC adapter input voltage	100/240 V
AC adapter output current	2.5 A
Operating temperature (T-T)	-10 - 40 °C
Moving control functions	Backward, Downward, Forward, Upward
Megapixel	20 MP
Sensor type	CMOS
Video resolutions	1920 x 1080, 3840 x 2160, 4096 x 2160 pixels
Optical sensor size	1/2 \
Camera shutter speed	8-1/8000 s
Video formats supported	AVC, H.264, H.265, HEVC, MPEG4
Maximum image resolution	5280 x 3956 pixels
Field of view (FOV) angle	85 °
Supported video streaming modes	1080p
Battery voltage	7.2 V
Battery capacity	5000 mAh
Type	Quadcopter
Product color	Gray
USB ports quantity	1
Maximum speed	6 m/s
Frequency band	2.4 - 2.4835 GHz
Number of rotors	4 rotors
Maximum tilt angle	35 °
Hovering time (max)	45 min
Maximum ascent speed	1 m/s
Maximum weight capacity	- kg
Maximum wind resistance	12 m/s
Maximum operating distance	32000 m
Maximum yaw angular velocity	200 °/sec