To Next Page

To Previous Page

P4 Multispectral User Manual

Flight Recorder

Flight data is automatically recorded to the internal storage of the aircraft. To access this data,

connect the aircraft to the PC through the Micro USB port and launch the DJI Assistant 2.

Attaching and Detaching the Propellers

Use only DJI approved propellers with your aircraft. The grey and black ring on the propeller indi-

cate where they should be attached and in which direction whey should spin.

Propellers Silver Ring Black Ring

Figure

Attach On Motors without black dots Motors with black dots

Legends

Lock : Turn the propellers in the indicated direction to mount and tighten.

Unlock : Turn the propellers in the indicated direction to loosen and

remove.

Attaching the Propellers

1. Be sure to remove the warning stickers from the motors before attaching the propellers.

2. Mount the propellers with black propeller rings to the motors with black dots. Mount the

propellers with sliver propeller rings to the motors without black dots. Press the propeller down

onto the mounting plate and rotate in the lock direction until it is secured in its position.

Detaching the Propellers

Press the propellers down into the motor mount and rotate in the unlock direction.

Be aware of the sharp edges of the propellers. Handle with care.

Use only the DJI approved propellers. Do not mix propeller types.

Check that the propellers and motors are installed correctly and rmly before every ight.

Ensure that all propellers are in good condition before each ight. DO NOT use aged, chipped, or

broken propellers.

To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning.

ONLY use original DJI propellers for a better and safer ight experience.

Other manuals for dji P4 MULTISPECTRAL

Questions and Answers:

Need help?

Do you have a question about the dji P4 MULTISPECTRAL and is the answer not in the manual?

General