To Next Page

To Previous Page

Flight

Once the pre-ight preparation is complete, it is recommended to hone your ight skills through

training and practice ying safely. The altitude limit is 1, 640 feet (500 meters). Avoid ying at any

altitudes higher. It is important to understand basic ight guidelines for the safety of both you and

those around you. Refer to the disclaimer and safety guidelines for more information.

Flight Environment Requirements

1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10

m/s, snow, rain and fog.

2. Only y in open areas. Tall structures and large metal structures may aect the accuracy of the

on-board compass and GNSS system.

3. Avoid obstacles, crowds, high voltage power lines, trees, and bodies of water.

4. Minimize interference by avoiding areas with high levels of electromagnetism, including base

stations and radio transmission towers.

5. Aircraft and battery performance is subject to environmental factors such as air density and

temperature. Be very careful when ying at altitudes greater than 19, 685 feet (6000 meters)

above sea level, as the performance of the battery and aircraft may be aected.

6. In the Earth’s polar regions the aircraft can only operate in Attitude mode or using vision

positioning.

GEO (Geospatial Environment Online) System

Introduction

DJI’s Geospatial Environment Online (GEO) System is a global information system committed to

providing real-time airspace information within the scope of international laws and regulations.

GEO provides flight information, flight times and location information to assist Unmanned Aerial

Vehicle (UAV) users in making the best decisions related to their personal UAV use. It also includes

a unique Regional Flight Restrictions feature which provides real-time ight safety and restriction

updates and blocks UAVs from ying in restricted airspace. While safety and obeying air trafc

control laws is a paramount concern, DJI recognizes the need for exceptions to be made under

special circumstances. To meet this need, GEO also includes an Unlocking feature that enables

users to unlock flights within restricted areas. Prior to making their flight, users must submit an

unlock request based on the current level of restrictions in their area.

GEO Zones

DJI’s GEO System designates safe flight locations, provides risk levels and safety concerns for

individual ights, and offers restricted airspace information, which can be viewed by users in real

time on DJI GS Pro. The locations designated by GEO are called GEO Zones. GEO Zones are

specific flight areas that are categorized by flight regulations and restrictions. GEO Zones that

prohibit ight are implemented around locations such as airports, power plants, and prisons. They

can also be temporarily implemented around major stadium events, forest res, or other emergency

situations. Certain GEO Zones do not prohibit flight but do trigger warnings informing users of

potential risks. All restricted ight areas are referred to as GEO Zones, and are further divided into

Other manuals for dji P4 MULTISPECTRAL

Questions and Answers:

Need help?

Do you have a question about the dji P4 MULTISPECTRAL and is the answer not in the manual?

General