To Next Page

To Previous Page

Remote Controller

Profile

The remote controller features DJI’s long-range transmission technology OcuSync that is

capable of controlling the aircraft and the gimbal cameras at a maximum transmission range of

4.3 mi (7 km). Connect an iPad to the remote controller via the USB port to use DJI GS Pro app

to plan and perform missions. Export the captured images for analysis and create multispectral

maps.

Compliance Version: The remote controller is compliant with local compliance and regulations.

Operating Mode: Control can be set to Mode 1 or Mode 2, or to a custom mode.

Mode 1: The right stick serves as the throttle.

Mode 2: The left stick serves as the throttle.

To prevent transmission interference, do not operate more than three aircrafts in the same area.

Using the Remote Controller

Turning the Remote Controller On and O

The P4 Multispectral remote controller is powered by a 2S rechargeable battery that has a capacity

of 6000 mAh. The battery level is indicated via the Battery Level LEDs on the front panel. Follow

the steps below to turn on your remote controller:

1. When the remote controller is turned off, press the Power Button once. The Battery Level

LEDs will display the current battery level.

2. Press and hold the Power Button to turn on the remote controller.

3. The remote controller will beep when it is turned on. The Status LED will rapidly blink green,

indicating that the remote controller is linking to the aircraft. The Status LEDs will glow solid

green when linking is complete.

4. Repeat Step 2 to turn o the remote controller.

Other manuals for dji P4 MULTISPECTRAL

Questions and Answers:

Need help?

Do you have a question about the dji P4 MULTISPECTRAL and is the answer not in the manual?

General