To Next Page

To Previous Page

P4 Multispectral User Manual

Warning Zones, Enhanced Warning Zones, Authorization Zones, Altitude Zones, and Restricted

Zones. By default, GEO limits flights into or taking off within zones that may result in safety or

security concerns. There is a GEO Zone Map, which contains comprehensive global GEO Zone

information on the ofcial DJI website: https://www.dji.com/ysafe.

The GEO System is for advisory purposes only. Individual users are responsible for checking ofcial

sources and determining which laws or regulations may apply to their ight. In some instances,

DJI has selected widely-recommended general parameters (such as a 1.5-mile radius at airports)

without making any determination as to whether these guidelines match regulations that apply to

specic users.

GEO Zone Denitions

Warning Zones:

Users receive a warning message with information relevant to their ight.

Enhanced Warning Zones:

Users receive a prompt from the GEO System at the time of ight. They

are required to submit an unlock request to y in the zone, for which they must conrm their ight

path.

Authorization Zones:

Users receive a warning message and the flight is prohibited by default.

Authorization Zones can be unlocked by authorized users with a DJI-verified account. Self-

Unlocking privileges must be applied for online.

Altitude Zones:

Flights are limited to a specic altitude.

Restricted Zones:

Flights are completely prohibited. UAVs cannot y in these zones. If you have

obtained permission to y in a Restricted Zone, please go to https://www.dji.com/ysafe or contact

ysafe@dji.com to unlock the zone.

DJI GEO Zones aim to ensure the user’s flight safety, but it cannot be guaranteed to be in full

compliance with local laws and regulations. Users should check local laws, regulations, and

regulatory requirements before each ight and are responsible for the ight safety.

All intelligent ight features will be affected when DJI aircraft y nearby or into GEO Zones. Such

interference includes, but is not limited to, decreased speed, takeoff failure, and ight termination.

Flight Restrictions

Introduction

UAV operators should abide by all ight regulations established by the relevant government and

regulatory agencies, including the ICAO and the FAA. For safety reasons, ights are restricted by

default, which helps users operate DJI products safely and legally.

When Global Navigation Satellite Service (GNSS) is available, GEO Zones are taken into account to

ensure ight safety.

Other manuals for dji P4 MULTISPECTRAL

Questions and Answers:

Need help?

Do you have a question about the dji P4 MULTISPECTRAL and is the answer not in the manual?

General