To Next Page

To Previous Page

P4 Multispectral User Manual

Using the Battery

LED1

LED2

Battery Level Indicators

LED3

LED4

Power Button (Built-in LED)

Turning ON/OFF

Turning On: Press the Power Button once, then press again and hold for 2 seconds to turn on.

The Power LED will turn green and the Battery Level Indicators will display the current

battery level.

Turning

Off:

Press the Power Button once, then press again and hold for 2 seconds to turn o. The

battery power LED will flash when powering off the Phantom to allow automatically

stopping of a recording during the event recording wasn’t stopped.

Low Temperature Notice:

1. Battery capacity is signicantly reduced when ying in low temperature (< 0°C) environments.

2. It is not recommended that the battery be used in extremely low temperature (< -10°C)

environments. Battery voltage should reach the appropriate level when operating environment

with temperatures between -10°C and 5°C.

3. End the flight as soon as DJI GS Pro displays the “Low Battery Level Warning” in low

temperature environments.

4. Keep the battery indoors to warm it before ying in low temperature environments.

5. To ensure optimal performance of the battery, keep the battery temperature above 20°C.

6. The charger will stop charging the battery if the battery cell’s temperature is not within the

operating range (0°C ~ 40°C ).

In cold environments, insert the battery into the battery compartment and turn on the aircraft for

approximately 1-2 minutes to warm up before taking o.

Other manuals for dji P4 MULTISPECTRAL

Questions and Answers:

Need help?

Do you have a question about the dji P4 MULTISPECTRAL and is the answer not in the manual?

General