dji SPARK User Manual

©
2017 DJI All Rights Reserved.
17
Spark User Manual
1.5 m
2. Launch DJI GO 4, tap , then select QuickShot, and follow the prompts.
3. Select your target subject in the camera view and choose a shooting mode. Tap “GO” to begin
recording. The aircraft will y back to its original position after shooting is nished.
4. View and edit the generated or original video using Playback.
QuickShot is only available when GPS signal is strong.
Tap in DJI GO 4 to exit QuickShot anytime during shooting
.
In QuickShot, the aircraft cannot avoid obstacles automatically. Please make sure to only use
QuickShot in wide open areas.
ActiveTrack
ActiveTrack allows you to mark and track a moving object on your mobile device’s screen. No external
tracking device is required.
Spark can automatically identify and trace bikes and other vehicles, people and animals, and use
different tracking strategies for each.
S 1.1D 9.6
H 9.6
61%
QuickShot
12
09:29
In-Flight（GPS）
2.4G
1080P/30
61%
QuickShot
12
09:29
GO
2.4G
In-Flight（GPS）
1080P/30
1. Take off and ensure the aircraft is ying at least 4.5 ft (1.5 m) above the ground.

dji SPARK Specifications

Operating Environment

max speed	31 mph (50 kph)
operating temperature	32° to 104° F (0° to 40° C)
charging temperature	41° to 104° F (5° to 40° C)

Camera

sensor	1/2.3” CMOS
effective pixels	12 Megapixels
video recording modes	FHD: 1920×1080 30p

Power

charger input	100-240 V, 50/60 Hz, 0.5 A
charger output	5 V 3 A / 9 V 2A / 12 V 1.5 A
battery capacity	1480 mAh

Remote Control

operating frequency	2.4G / 5.8G
max transmission distance (Wi-Fi)	100 m (Distance), 50 m (Height)
max transmission distance (Remote Controller)	2000 m

Weight and Dimensions

weight	300 g
dimensions	143×143×55 mm