dji Zenmuse Z15-A7 - PC Assistant Tuning; Installation and Usage; Basic Settings

Zenmuse Z15-A7
User Manual
18
©
2015 DJI. All Rights Reserved.
PC Assistant Tuning
Installation and Usage
1. Ensure the most recent drivers are installed correctly. This should be done before using the A2 or
WooKong-M software.
2. Download the appropriate Assistant installer from DJI.com.
3. Double click the Assistant installer and follow the steps to nish the installation.
4. Run Assistant.
5. Upgrade the rmware or congure parameters using Assistant as needed.
The Assistant installer can be used on Windows XP, Win7, and Win8 (32 or 64 bit).
Basic Settings
You can set transmitter channels for roll, tilt and pan control, and also switch between working modes
during ight. Move your cursor to each area or refer to this manual for more details.
TX
2-Position Switch
TX Command TX Command TX Command
Wireless
RC Receiver
3-Pin Cable
Internal Cable
HDMI-HD/AV
Module
Gimbal
Camera
GCU
Shutter Button
2-Position
Switch Channel
SHUT
Infrared Remote Control
PC Assistant Tuning