©
2015 DJI. All Rights Reserved.
5
In the Box
Gimbal × 1
The Z15-A7 gimbal includes built-in servo drive
modules, an independent IMU module, an infrared
remote control module and a HDMI-HD/AV module.
Gimbal Controller Unit (GCU) × 1
Connect the GCU to your Flight Control System
using the CAN-Bus cable. The GCU will control the
gimbal’s pan, roll and tilt movements. Connect the
GCU to a video downlink for a video signal.
Mounting Bracket × 4
For mounting the gimbal to the landing gear.
Mounting Board for Receiver × 1
For attaching the GCU and providing a convenient
mount for the receiver or other devices.
Camera Mounting Screw × 1
A standard tripod mounting screw.
Screw Package × 1
For mounting the gimbal to your aircraft (M2.5*8 cap
head screw).
10-Pin to 9-Pin Cable × 2
For connecting the GCU to the gimbal.
7-Pin Cable × 1
For connecting the GCU to the Lightbridge air system.
In the Box
To Next Page
Loading...
