dji Zenmuse Z15-A7 - Page 6

Zenmuse Z15-A7
User Manual
6
©
2015 DJI. All Rights Reserved.
8-Pin to 6-Pin Cable × 2
For connecting the GCU to the gimbal.
Servo Cable Package × 1
For connecting the GCU and the receiver.
AV Video Power Cable × 1
For connecting the GCU and the wireless video
transmission module, and transmitting the AV signal.
iOSD Mark II Cable × 1
For connecting the GCU to the DJI iOSD Mark II.
Micro-USB Cable × 1
For adjusting parameters and upgrading rmware via
a PC.
CAN-Bus Cable × 1
For the CAN-Bus Flight Control System.
D J I
D J I
Spare Package × 1
Vibration Absorbers, Spare Screws, and Mounting
Bracket